DOCK ACCENTS

Great Products for Waterfront Living!
           

 
 
Home
About Us
Business Opportunities
Dock Products
Water Sport Products
View Cart
 
 

 


 

About Us

 ....for all your dock hardware needs in construction of floating docks, swim platforms, ramps or for other unique applications.
 

Angles Backup Plates Carriage Bolt Sets Connector Pin Sets Chain Retainer
T Connectors Hex Head Bolt Sets HD Dock Plate Piling Hoops Inside Corners
Inside Corner
Pipe Holder
Outside Corner Outside Corner End Outside Corner
Pipe Holde
r
Hinge Set
HD Roller Assembly HD Piling Hoop and
Roller Assembly
Chain Pile Holder Ramp Roller Lag Screw Sets

    
 
Click on a hardware item on the diagram to view description     Angle Backup Plate Chain Retainer Outside Pipe Holder Female T Connector Male T Connector Outside Corner End Inside Corner Outside Corner Female Outside Corner Male Inside Corner Pipe Holder Polyflange Dock Float Dock Hardware for contruction of floating docks, swim platforms, ramps, and other unique applications. Floating Dock Kits available as well.

 

     Hardware Is designed for use with 1-1/2" thick lumber (minimum width 6"). In general, inside hardware can be  mounted with 5/16" lag screws or 1/2" carriage bolts. It is recommended to use 1/2" bolts or screws for all connecting outside hardware. Both male and female dock to dock connections are made with either 3/4" bolts with lock nuts or 3/4" connecting pins.

All pricing for hardware listed is for a commercial grade hardware.

     Consumer Tips:  To build a floating dock, we typically use 5/16" x 1 1/2" SS lag screw sets to secure floats to frame.  Angles and inside corners are essential in constructing your floating dock.  Other hardware items depend on your individual need and connection method. (For more details,  give us a call @ 1-888-219-0112)


Outside Corner (Female)
Two 1/2" welded tabs. Use with a male outside corner. Each leg is 10"L x 5"H.
 
$35.50 Buy Now

(Back to Diagram)

 


Outside Corner

dock hardware - outside corner female

 


Outside Corner (Male)
One 1/2" welded tab. Use with a female outside corner to connect docks end to end. Joint requires 3/4" bolt set (N) or connector pin (O). Each leg is 10"L x 5" H.
 

$30.00

Buy Now

(Back to Diagram)

 


Outside Male Corner

dock hardware - outside corner male

 


Outside Corner End
Use this corner at ends of fingers and docks for additional support and protection. Ideal for swim floats and ski jump corners. Each leg is 10"L x 5"H.
 

$26.00 Buy Now

(Back to Diagram)

 

Outside Corner End

dock hardware - outside corner end


Inside Corner
This heavy- duty inside corner can be used alone or with an outside corner. Each leg has elongated holes for easy fit-up and is 8-1/2"L x 5"H.
 

$23.50 Buy Now

(Back to Diagram)

Inside Corner

dock hardware - inside corner


Inside Corner/Pipe Holder 2"or 3"
These heavy-duty inside corners should be used with one of the outside corners and as an internal pipe holder to be used with either 2" or 3" pipe or give strength to the dock's frame. Measures 8-1/2"L x 5"H. Attach using 5/16"x1/12 lag screw sets or carriage bolt sets.

2" Pipe Holder

$42.00 Buy Now

3" Pipe Holder

$47.00 Buy Now

(Back to Diagram)

*Special Order

Inside Corner Pipe

inside corner pipe holder


Angle
Use this heavy-duty angle for all cross supports. Each leg measures 2-1/2"L x 5"H.
 

 

$7.00 Buy Now

(Back to Diagram)

 

                Angle

              dock hardware - angle


Washer Plate
Use two washer plates if desired, with each angle.  Measures 1-1/2"L x 5"H.
 

$1.85 Buy Now

(Back to Diagram)

dock hardware - washer plate

dock hardware - washer plate
 


Female T Connector
Has two welded 1/2" tabs. Bolts to side of dock to attach fingers and ramps. 5"L x5"H.
 

$20.00 Buy Now

(Back to Diagram)
 



Female T Connector

Male T Connector
Has one welded 1/2" tab. Use with female T connector to attach fingers and ramps. 5"L x 5"H. Use 3/4" bolt set or connecting pin for joint.
 

$16.00 Buy Now

(Back to Diagram)

 


Male T Connector

dock hardware - male T connector
 


Hinge Set
Hinge Set consists of Male T connector, Female T Connector and Connector Pin Set.  Ideal for hinging two or more floating docks together.
 

$44.00

       Buy Now

(Back to Diagram)

 


     Female T Connector as part of hinge setmale T connector as part of hinge set

             connector pin set as part of hinge set


Back-Up Plates
5"x5" reinforcing plates are used to back up the Single T Males and Females. Commercial Grade.

 

$6.50 Buy Now

(Back to Diagram)

 

back up plate

dock hardware back up plate

   

Pipe Holder/ Outside 3"
Bolts to outside of dock. Carriage bolt set required for attaching. Use 2" pipe to hold dock in place.
 

$31.50 Buy Now

(Back to Diagram)

 

outside pipe holder

dock hardware - outside pipe holder


Lag Screw Set
--- 5/16 x 1 1/2" Stainless Steel lag screw and flat washer  used to attach flotation drums to dock system AND for securing inside hardware..
--  3/8 x 3" Hot dipped galvanized lag screw set work well for mounting ladders to piers.
---1/2 x 2 or 3" Stainless Steel lag screw and flat washer used for mounting connecting hardware such as hoops, roller assembly, and hinge sets OR Carriage Bolt sets can be used as well. 

 

5/16" x 1 1/2"  SS Lag Screw Set

$0.80

         Buy Now

3/8" x 3" Galvanized Lag Screw Set

$1.00

Buy Now

1/2" x 2" SS Lag Screw Set $2.30 Buy Now
1/2" x 3"  SS
Lag Screw Set
$2.60
Buy Now

(Back to Diagram)

 


dock hardware fasteners - lag screw sets
 


Carriage Bolt Set

1/2"x3" Galvanized Carriage Bolt Sets (can be  used with all inside and outside hardware)
 
$1.85 Buy Now

1/2 x 5" Galvanized Carriage Bolt Sets

$2.69 Buy Now

(Back to Diagram)

 

dock hardware - galvanized carriage bolt set

dock hardware - galvanized carriage bolt set


3/4" Hex Head Bolt Set
Includes lock nut. Used to connect male and female T connectors in the same manner the connector pin set is used (at the joint). (not for mounting)  Galvanized. 3/4" x 3-1/2".
 
$4.25 Buy Now

(Back to Diagram)

 

dock hardware - hex head bolt

dock hardware - hex head bolt set


Connector Pin Set
For quick disconnect. Used to connect male and female T connectors. Galvanized 3/4" connector pin and hitch clip pin.
 
$8.50 Buy Now

(Back to Diagram)

 

dock hardware - connector pin

dock hardware - connector pin


Heavy Duty Deck Plate
For use with Piling Hoop. This 3/16" thick 4"x6" angle can be bolted from the top and side of the dock. The hoop can then be bolted to the angle, allowing it to be removed seasonally. 22" long. Commercial grade.
 
$58.00 Buy Now

(Back to Diagram)
 

dock hardware - deck plate

dock hardware - deck plate


Chain Retainer
Bolts to side of dock. Use weights and chains to hold dock in place. Accommodates 1/4", 3/8", & 1/2" chain. Measures 5"L x 5"H.
 
$24.00 Buy Now

(Back to Diagram)

*Special Order

dock hardware - chain retainer


 HD Piling Hoops
Made with heavier 1/4" thick hot dip galvanized steel. Commercial Grade. (Use 1/2" x 3" lag screws or carriage bolts for mounting)

8" Diameter (for 6" Piling)
$21.00 Buy Now

10" Diameter (for 8" Piling)
$26.00 Buy Now

12" Diameter (for 10" Piling)
$31.50 Buy Now

14" Diameter ( for 12" Piling)
$39.00 Buy Now

(Back to Diagram)

*14" piling hoop- special order.

dock hardware - piling hoop


 HD Tubular Piling Hoop
For pilings up to 12" in diameter. The hoop is constructed of 1 1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional Deck Plate. Commercial Grade.
 

$79.00 Buy Now

(Back to Diagram)

 

*Special Order

dock hardware - tubular piling hoop

dock hardware - tubular piling hoop


HD Piling Hoop and Roller Assembly
Intended for areas with lots of wind, current, or tidal action.  Combines the Piling Hoop and Roller Assembly to make up and down movement easier.  For pilings up to 12" in diameter. Commercial Grade
 

$225.00 Buy Now

(Back to Diagram)

*Special Order


 

dock hardware - heavy duty piling hoop with roller


Chain Pile Holder
Made with heavier 1/4" thick hot dipped galvanized steel.

HD galvanized deck plate with chain for connecting to pilings or pipes. Chain - easy disconnect. Commercial Grade.

 
$94.50 Buy Now

(Back to Diagram)

 

dock hardware - chain pile holder

*Note:  Center bumper is made of galvanized steel - it is not a roller.



Heavy Duty Internal Pile Guide 14"

Galvanized nternal Pile Guide with rollers measures 24" x 24" x 7 15/16".  14" clearance for square or round piling. 
 

 

$250.00 Buy Now

(Back to Diagram)


 



Heavy Duty Roller Assembly

Bracket and roller bolt directly to the Deck Plate (not pictured) and can be added to aid up-and-down motion of the dock in areas with tidal action. 6" roller turns on a 5/8" diameter shaft. 3/8" bracket is hot-dipped galvanized. Note: This roller assembly will not work with the pile chain holder deck plate.
 

$50.00 Buy Now

(Back to Diagram)


dock hardware - roller

dock hardware - roller

 

 


Inside Ramp Bracket with Roller
Made of heavier 1/4" hot dipped galvanized steel.  Functions as inside corner for ramp with built-in roller.  Left-hand and Right-hand ramp roller brackets available.
 
Left Hand Ramp Roller
$63.00 Buy Now
 
Right Hand Ramp Roller Bracket
$63.00 Buy Now

(Back to Diagram)
 

 

dock hardware - ramp roller bracket


Galvanized Eye Bolt
1/2" x 3 1/4" hot dipped galvanized.  Includes nut.
$6.95 Buy Now


(Back to Diagram)
 

dock hardware - galvanized eye bolt


   

BACK TO TOP

 


Home | Products | About Us | Business Opportunities | Contact | Related Links | Piling Caps | Pile Wrap |  Floating Docks | Ramps & Gangways | Ladders | Dock Accessories | Dock Floats | Dock Hardware | Dock Bumpers | Dock Cleats Power Centers & Stands | Boat Lifts | Jet Ski Lifts & Other Products |  Dock & Marine Lighting | Weed Razer| Dock Wheels | Dock Steps | Dock Carts |Mooring  Systems | Water Sports | Future Beach Pedal Boats | Water Parks | Water Hammocks | Kayaks | Water Bikes | Pool & Beach Products | SITEMAP