Great selection of Jet Ski Products: Jet Ski Lifts,
Jet Ski Drive on Ramps,  Roll-n-Go Shore Ramps and  Jet Rails.

Vertical Jet Ski Lifts Aluminum Skiff Lifts Electric/Swinger: for jet skis and small watercraft 1000 lb. Swinger Mount   $1,850.00 1500 lb. Swinger Mount   $2650.00      Call 804-776-7710 for details. Galvanized Skiff Lifts Electric/Stationary for jet skis and small watercraft 800 lb. Stationary Mount $1,400.00 1500 lb. Stationary Mount $1,800.00 2500 lb. 2-pole jet boat lift $3050.00     Call 804-776-7710 for details. Click on picture for enlarged view Aluminum PWC Lifts for jet skis and small watercraft 950 lb. Water Craft Lift - Manual Winch w/ 10 ft. alum track- Freshwater $1150.00 950 lb. Water Craft Lift - Manual Winch w/ 10 ft. alum track- Saltwater $1200.00 950 lb. Water Craft Lift - Electric Winch w/ 10 ft. alum track - Freshwater $1395.00 950 lb. Water Craft Lift - Electric Winch w/ 10 ft. alum track - Saltwater $1450.00 1500 lb. Water Craft Lift - Electric Winch w/ 10 ft. alum track - Freshwater $1725.00 1500 lb. Water Craft Lift - Electric Winch w/ 10 ft. alum track - Saltwater $1775.00 2500 lb. Water Craft Lift - Electric Winch - Twin 10 ft. alum tracks - Freshwater $2695.00 2500 lb. Water Craft Lift - Electric Winch - Twin 10 ft. alum tracks - Saltwater $2800.00  Call 804-776-7710 for details and a shipping quote.   (Back to Top)

• One person launch 'n load

• Easy assembly

• Northing else to buy

• Small "footprint", takes up less room on dock

 The Jet Rail is an all galvanized steel Jet Ski Lift  designed for easy one person "launch and load".  The small footprint under the ski allows easy walk around while the watercraft is stored on the dock or seawall.  The 800 lb. brake winch and mount adjust to any size watercraft and slides inside the lift when not in use, saving even more precious dock space.  Carpeted bunk boards and all hardware included.  All you add is your Jet Ski or PWC!

     Specifications

1. Weight without Jet Ski or PWC - 152 lbs.

2. Length with extension in - 7'-1"

3. Lenth with full extension - 10'-4"

4. Width without Jet Ski or PWC -  21-1/2"

5. Width of dock mounting hdw. - 18"

6. Length between dock mounting hdw - 6'

7. Winch capacity - 800 lbs.

8. Winch strap length - 15'

9. Height without Jet Ski or PWC at winch - 36"

10. Height without Jet Ski or PWC at bunk rail - 19"

11. Maximum space between edge of dock and rear dock mount - 22"

12. Bunk Length - 5 '

13. Max. height from water to dock mount - 22"

    Capacities:

• Weight of Jet Ski or PWC  (or capacity of dock, whichever is less) -  650 lbs.

• Width of Jet Ski or PWC  (Determined by dock space)

• Length of Jet Ski or PWC - 10'-2"

*This item is UPS shippable (Total shipping weight = 170 lbs).  **Assembly required.

(Back to Top)

The Jet Rail XL is an all galvanized steel Jet Ski Lift lift designed for easy one person "launch and load".  The small foot print under the ski allows easy walk around while the watercraft is stored on the dock or seawall.  The 1200 lb. brake winch and mount adjusts to any size watercraft and slides inside the lift when not in use, saving even more precious dock space.  Carpeted bunk boards and hardware are included.  All you add is your Jet Ski Lift!

Specifications:

1. Weight without Jet Ski or PWC - 175 lbs.

2. Length with extension in - 7' 1".

3. Length with full extension - 10' 8".

4. Width without Jet Ski or PWC - 22"

5. Width of dock mounting hdw. - 18"

6. Length between dock mounting hdw - 6'.

7. Winch capacity - 1200 lbs.

8. Winch strap length - 15'.

9. Height without Jet Ski or PWC at winch - 36".

10. Height without Jet Ski or PWC at bunk rail - 19".

11. Maximum space between edge of dock and rear dock mount - 2.5".

12. Bunk Length - 5'.

13. Max. ht. from water to dock mount - 22".

Capacities:

• Weight of Jet Ski or PWC:  950 lbs (or capacity of dock, whichever is less).

• Length of Jet Ski or PWC: 10' 2".

*This item is UPS shippable (Total shipping weight = 181 lbs).  **Assembly required.

(Back to Top)
 

    The Jet-T, a quality jet lift adds to the enjoyment of your personal watercraft. The Jet-T is maintenance free with no moving parts to service or clean. Featuring our secure attachment and trouble-free operation, it is easy to pull up on the Jet-T and just walk away. To blast off, just sit back and push off. It's that easy to get out on the water.

• 9' 3" x 5' 9" x 9"

• Approximately 1000 lbs. Working Capacity and  2000 lbs Total Capacity*

• Non-skid surface

• Use standard 4" PVC Pipe for Easy Mounting on-skid surface. 

• Mounting Kit included:  (Consist of (2) dock mounting flanges and elbows)

• Recommended for 1-2 seater Jet Skis.

*This item is not UPS shippable:  Call for a freight quote or email your request with city, zip code and contact information to dockaccents@cablefirst.net

*Working capacity is the recommended maximum weight of your jet ski (with fuel).
*Total capacity is the actual amount of weight it would take to sink the Jet-T ramp.

(Back to Top)

 Welcome to the Wave of the Future...The Jumbo Jet-T jet ski lift!  Our Jumbo Jet lift is designed to accommodate a Three or Four-Seat Jet Ski, along with other watercrafts. Our Jumbo Jet-T Craft System has the same features as our standard Jet-T, just larger and much more adaptable.

Jumbo Jet-T Features:

Jet Ski Lift Shore Ramp Features:

*This item is UPS shippable

(Back to Top)

(Back to Top)